WEKO3
アイテム
Experimental and Numerical Study on Mode II Delamination Behavior of Stitched CFRP Laminate
http://hdl.handle.net/10748/7779
http://hdl.handle.net/10748/7779c05c4fb5-1907-4cff-8d01-55ee28942a77
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
jonny_herwan_comment.pdf (158.4 kB)
|
|
|
|
jonny_herwan_abstract.pdf (103.8 kB)
|
|
|
|
Jonny_Herwan_fulltext (9.4 MB)
|
|
| Item type | 学位論文 / Thesis or Dissertation(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2016-07-04 | |||||||
| タイトル | ||||||||
| タイトル | Experimental and Numerical Study on Mode II Delamination Behavior of Stitched CFRP Laminate | |||||||
| 言語 | en | |||||||
| 言語 | ||||||||
| 言語 | eng | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | Mode II delamination | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | energy release rates | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | end notched flexure test | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | 3D reinforcement | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | stitching | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | finite element modelling | |||||||
| キーワード | ||||||||
| 主題Scheme | Other | |||||||
| 主題 | cohesive zone model | |||||||
| 資源タイプ | ||||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_db06 | |||||||
| 資源タイプ | doctoral thesis | |||||||
| アクセス権 | ||||||||
| アクセス権 | open access | |||||||
| アクセス権URI | http://purl.org/coar/access_right/c_abf2 | |||||||
| 著者 |
Herwan, Jonny
× Herwan, Jonny
|
|||||||
| 著者(ヨミ) |
ヘルワン, ジョニー
× ヘルワン, ジョニー |
|||||||
| 抄録 | ||||||||
| 内容記述タイプ | Abstract | |||||||
| 内容記述 | Carbon fiber reinforced plastics (CFRP) possess a superb strength and stiffness to weight ratio, thus have been used increasingly for light weight structures. However, conventional CFRP are very weak in the thickness direction and prone to be delaminated on interlaminar surfaces. To overcome this issue, stitching technique has been attracted a lot of attention. This dissertation aims to evaluate mode II (shear mode) delamination of stitched composites through experiment and finite element simulation. Based on literature review, evaluating mode II delamination behavior of stitched composites is facing a serious problem. The testing specimens were failed before crack propagation. Considering this issue, a modified method called tabbed end notched flexure (TENF) test is proposed and the effects of stitching parameters are investigated. It is found that the laminate with maximum stitch density and stitch thread thickness in this study have energy release rate 2.4 times of those unstitched one. To understand the crack bridging mechanism, a single stitched laminate under shear loading has also been investigated using a novel test called interlaminar shear test (IST). Based on this test, finite element simulation of TENF test has been developed. Using cohesive element (to simulate crack propagation plane) and spring connector element (to present the stitch thread), high accuracy of finite element modeling was achieved. Finally, the finite element model is extended to understand stitched laminate behavior under four point end notched flexure (4ENF) and quasi static indentation test. | |||||||
| 内容記述 | ||||||||
| 内容記述タイプ | Other | |||||||
| 内容記述 | 首都大学東京, 2016-03-25, 博士（工学） | |||||||
| 書誌情報 |
p. 1-117, 発行日 2016-03-25 |
|||||||
| 著者版フラグ | ||||||||
| 出版タイプ | VoR | |||||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||||
| その他のタイトル | ||||||||
| その他のタイトル | 縫合CFRP複合材のモードII層間剥離についての実験および数値解析的研究 | |||||||
| 言語 | ja | |||||||
| 学位名 | ||||||||
| 学位名 | 博士（工学） | |||||||
| 学位授与機関 | ||||||||
| 学位授与機関識別子Scheme | kakenhi | |||||||
| 学位授与機関識別子 | 22604 | |||||||
| 学位授与機関名 | 首都大学東京 | |||||||
| 学位授与年月日 | ||||||||
| 学位授与年月日 | 2016-03-25 | |||||||
| 学位授与番号 | ||||||||
| 学位授与番号 | 甲第614号 | |||||||
