@article{oai:tokyo-metro-u.repo.nii.ac.jp:00003890,
 author = {ユアサ, サブロウ and サコダ, コウ and アイザワ, シンリ and キタガワ, コウキ and Yuasa, Saburo and Sakoda, Kou and Aizawa, Shinri and Kitagawa, Koki},
 issue = {2},
 journal = {Proceedings of the Combustion Institute},
 month = {Jan},
 note = {An experimental study was performed on the combustion characteristics of a jet diffusion flame of Mg vapor injected through a small nozzle into CO2 atmospheres at low pressures from 8 to 48 kPa with a view to using Mg as fuel for a CO2-breathing turbojet engine in the Mars atmosphere. The Mg vapor jet produced three types of the flame. At lower pressures and higher injection velocities, a red-heated jet flame formed, in which the injected Mg vapor was heated by spontaneous reactions, turning red. At medium pressures and injection velocities, a stable luminous lifted-like flame developed above the rim of the chimney, a tube-like combustion product for the Mg vapor passage that grew on the nozzle during combustion. The flame had similar flame length properties to laminar jet diffusion flames of gaseous fuels. At higher pressures and lower injection velocities, a stable luminous attached flame developed at the rim of the chimney. The same reactions, producing MgO(g), CO and MgO(c), proceeded preferentially for all flames and chimneys. Carbon was only subordinately generated. Burning behavior of Mg vapor jets in a CO2 atmosphere has been represented, including the homogeneous reaction of Mg vapor with CO2, the diffusion of CO2, and the condensation and deposit of MgO. The injection velocity of Mg vapor at the rim of the chimney and the exothermic reactions with diffused CO2 that occur there play a crucial role in the attachment and development of the flames. The flame structure may be explained in terms of the relatively low gas-phase reaction rate of Mg with CO2., Article},
 pages = {2037--2044},
 title = {Combustion characteristics of Mg vapor jet flames in CO2 atmospheres},
 volume = {31},
 year = {2007}
}